The latest version of MegaCut is always available for download @
ftp://megaplot.com/MegaCut_XMD_QSL.zip

4.3.0.0 [23.05.2013]

• Added an acoustic singal indiating the end of cutting. This feature can be activated in Configuration under the General tab. When the cut is over - "play sound".
• Update to the Italian translation.

4.2.0.3 [08.05.2013]

• Bug fix: burning holes with the Cross means point feature
• Bug fix: spindle rotations on XMD when using the ethernet connection(optional)

4.2.0.1 [13.12.2012]

• Bug fix: acceleration algorithm for G-codes

4.2.0.0 [15.11.2012]

• New feature: support for a 12-bit converter for QSL lasers(increased powere scaling)
• Improvement: large bmp support in QSL lasers
• Improvement: curve movement and acceleration adjustments
• Bug fix: table movement in QSL11 (previously present when trying to save Configuration during a BMP cut
• Bug fix: Access violation error message cause

4.1.0.9 [15.11.2012]

• Bug fix: improved support for 64-bit Win7
• Bug fix: for QSL11 - When the cut is over go to... (unnecessary table movement eliminated)

4.1.0.8 [23.10.2012]

• Bug fix: eliminated the error message showing up while loading plt files with the multilayer setting on

4.1.0.7 [19.10.2012]

• Bug fix: improved G-Code support (for cases when the G-Code did not specify the rotations)

4.1.0.5 [18.10.2012]

• Bug fix: improved G-Code support
• Bug fix: for QSL11 - When the cut is over go to... (unnecessary table movement eliminated)

4.1.0.3 [12.04.2012]

• Bug fix: subsequent start error. After a cut and pressing the Start button again the second cut would not start.

4.1.0.2 [04.04.2012]

• New: changed QSL55 default settings

4.1.0.0 [03.01.2012]

• In Configuration on the General tab, it is now possible to specify machine movement at the end of a cut. Two possibilities:
  • return to the project's starting position (default so far)
  • go to any user-specified location
• New PL user's manual built in.
• New status message when trying to open MegaCut while another instance of MegaCut or MegaCut 3D is already running.

4.0.0.10 [23.11.2011]

• Improved interpretation of DXF files (applies to POLYLINE objects).

4.0.0.9 [27.10.2011]

• Deleted unused UI elements (Configuration: Lubrication tab).

4.0.0.8 [30.09.2011]

• Added support for a new laser cutter model: QSL32B.

4.0.0.5 [04.08.2011]

• Ethernet communication improvement (optional).

4.0.0.4 [22.07.2011]

• Bug fix - spiral cut with a very small spiral step. Sometimes the spiral would not go all the way down on a multiple shapes project. Problem existed since ver. 3.5.1.20

4.0.0.3 [20.06.2011]

• Improvements in the lining operation (sometimes a lining line shorter than the tool diameter was not generated).

4.0.0.2 [02.06.2011]

• Bug fix - cutting continuation on QSL lasers fixed. It applied only to the continuation of multi-layer objects when one or more shapes had a zero value for laser power.

4.0.0.1 [18.05.2011]

• There is a new G-Code setting in the Import tab of Configuration: Arc center is an absolute location. When this is enabled, the software uses absolute arc center addressing and the relative addressing is automatically turnf off.
• Vista and Win7 file systems support. Default location of MegaCut create files(mcc, out, cfg itp) on Windows Vista and Windows 7 is C:\Users\UserName\AppData\Local\Megaplot\MegaCut\, on the older Windows systems it remains: c:\Propgram files\Megaplot\MegaCut\

4.0.0.0 [10.05.2011]

• Updated multi-language support (please contact us if MegaCut is not available in your language yet)
• MegaCut ver. # is displayed on the aaplication top title bar
• Bug fix - it is no longer possible to run multiple instances of MegaCut at the same time
• Bug fix - it is no longer possible to run MegaCut and MegaCut 3D at the same time
• Minimum OS requirements: Win 2000, XP, Vista, Win7 or later. It does not support Win95 or Win98.